The bean dregs drying project jointly built by our company and Jiangsu customers has recently been completed. The customer is very satisfied with the equipment test results. The project has been officially put into production. In this project, our company provides customers with bean dregs flash drying equipment. The following is On-site video sharing of bean dregs flash drying system.
In the project, our company is the flash okara dryer equipment provided to the customer in accordance with the contract. During the design process of the equipment, the equipment is designed and manufactured according to the customer's processing capacity, moisture and other requirements in combination with the local environmental impact assessment. In dry form, it enters the dryer from the screw feeder. Under the strong action of the high-speed rotating stirring blade, the bean dregs are dispersed under the action of impact, friction and shearing force. The bulk material is quickly crushed, fully contacted with hot air and heated ,dry. The dried bean dregs after dehydration rises with the hot air flow, the grading ring traps large particles, and the small particles are discharged from the center of the ring to the outside of the dryer and recovered by the cyclone separator and dust collector. The undried or large pieces of bean dregs are thrown to the wall by centrifugal force. , And fall to the bottom to be crushed and dried.
At present, the equipment of this project has been officially put into production, and our company will continue to provide follow-up technical support and other services. Zhengzhou Dingli bean dregs flash dryer equipment consists of drying host, feeder, heat source device, air filter, blower, cyclone separator , Bag filter, induced draft fan and other key components, flash drying system equipment can be designed and manufactured according to customer needs, please leave a message for consultation.