HOME >  PRODUCTS > Food Residue Dryer
                        7*24 Hours Free Service Factory Direct Sales Environmental Protection

                        Food Residue Dryer

                        • - Capicity -
                          0.37-2.92 t/d
                        • - Power -
                          28-125kw
                        • - Views -
                          1328
                        【Application】:food residue, oat straw, wheat straw, rye straw, straw, sorghum straw, corn straw, potato vines, bean stalks,etc

                        Introduction

                        Processing Customized yes Capacity 0.37-2.92 t/d Warranty 1 year
                        Product brand DINGLI Power 28-125kw Place of Origin Henan, China (Mainland)
                        Specifications DLCG1210 Weight 13500kg Area 10m*24m

                        Principle

                        Material Flow: the raw material with 75-85% moisture will be sent into the dewatering machine, and then the moisture will be reduced to 60-65%, then feed into the dryer by screw conveyor, concurrent flow drying. Under the effect of the inner shoveling plate, materials are taken and scattered constantly and move in a spiral forward method. Through three layers (inner, middle and outer layer), heat exchange is realized between material and hot air medium. The materials that achieve the drying effect move forward fast and are discharged out of the roller. Wet materials that still don’t achieve drying effect couldn’t move fast due to self-weight and are dried completely during the controlling route, thus achieving drying effect. After the whole drying process is completed, materials are discharged by the screw conveyor. The final moisture will be reduced to 14-18% (can be adjusted according to the buyer’s requirement). there is a special device inside the dryer, which can prevent the unequal drying of materials.

                        Air Flow: through hot blast stove and air blower inflating, the air enters into the hot blast stove for combustion heating. Its temperature reaches up to 600-850℃, then it is inhaled by the dryer induced draft fan to dry material and evaporate water. When the temperature decreases to 55-60℃, it is discharged out of the dryer. Wet air containing dust is discharged on standard through dust remover purifying.

                        Characteristic

                        1. In accordance with customer requirements, the dryer can realize intelligent control, one key operation, automatic control of operating parameters, and the dryer are always in the best state of operation to ensure that the dried material is even stable and more energy-saving than the traditional dryer.

                        2. One-time quick completion of moisture from 60-65% to 14-18%, material temperature is always lower than 50 ℃, dry material completely retained the original nutrients, bright color, fragrant in odor.

                        3. With four motors drive, the transmission is more stable and reliable.

                        4. Frequency control is used to control material flow, and the final moisture requirement can be easily adjusted according to users' needs.

                        5. Cylinder self insulation thermal efficiency of up to 70% (traditional single dryer thermal efficiency is only 35%), improves the thermal efficiency of more than 30%.

                        6. Compared with the single-cylinder dryer, it reduces the occupation of land by about 50%, and the investment in civil engineering is reduced by about 50%.

                        7. Modular dust collection and purification, heat recovery and utilization configuration, safety, and environmental protection.

                        8. A number of new type of energy-saving clean hot air stove, fuel can be diesel, gas, coal, wood, wood chips, straw, straw and so on, and efficient energy-saving, heating controlled, simple operation, energy consumption down to 30%, electricity consumption reduced by 20%, lower operation cost.

                        Parameters

                        Specification Input Capacity(t/d) Output(t/d) Evaporation Capacity(t/h) Raw Material Moisture(%) Dried Material Moisture(%) Drying temperature(℃) Total Power(kw) Total Weight(kg) Area
                        DLCG2006/3 76.93 1.08-0.27 0.61 45-75% 14-18% (Adjustable) 280±30℃ (Average temperature) 28-35 19500 8m*12m
                        DLCG2008/3 105.19 1.48-0.37 0.84 45-66 22000 8m*15m
                        DLCG2010/3 133.45 1.88-0.46 1.06 56-78 24000 8m*18m
                        DLCG2012/3 161.71 2.57-0.64 1.45 60-82 25500 8m*20m
                        DLCG2212/3 183.05 2.92-0.72 1.65 65-85 27000 8m*20m
                        DLCG2512/3 204.72 3.26-0.81 1.84 90-125 38000 10m*20m

                        Food Residue Dryer Main Technical Parameter List

                        Related Case Case Center

                        Evaluation

                        Question & Answer

                        Mr. Daniel:Are you an intermediary or a manufacturer?
                        We are a Professional Manufacturer of Dewatering and Drying Machine, Wood Pellet Produ- ction line, etc. with 15 years experience.
                        Mr. Alex:Is it environmentally friendly?
                        Our equipment is customized according to the process, raw materials, moisture, etc. For detailed quotation, please contact us or E-mail us:
                        • Mr. Paul:Good~
                          2019-10-08 11:17:58
                        • Mr. Alex:Excellent service and environmental protection requirements.very well~
                          2019-09-17 14:23:46
                        • Mr. Daniel:Has been put into production, the drying effect is very good!
                          2019-09-02 15:13:20
                        • Mr. Paul:Good~
                          2019-10-08 11:17:58
                        • Mr. Alex:Excellent service and environmental protection requirements.very well~
                          2019-09-17 14:23:46
                        • Mr. Daniel:Has been put into production, the drying effect is very good!
                          2019-09-02 15:13:20
                        • Mr. Paul:Good~
                          2019-10-08 11:17:58
                        • Mr. Alex:Excellent service and environmental protection requirements.very well~
                          2019-09-17 14:23:46
                        • Mr. Daniel:Has been put into production, the drying effect is very good!
                          2019-09-02 15:13:20

                          Hot Products Product Center

                          Latest News News Center

                          *Name:
                          *Tel:

                          Price Solution Deliver After sales

                          Message:
                          Name:
                          E-mail:
                          Tel:
                          Message:
                          E-Mail Us Online Inquiry
                          久草影院